Chat with us, powered by LiveChat

Controlled stretch and drape allows firm handling for a rigid, conforming splint

Resistance to Stretch

  • Moderate to maximum resistance to stretch.
  • Can be stretched and pulled around curves without thinning or growing out of control.
  • Able to position limb and aggressively hold and stretch material to form splints.

Drape

  • Moderate drape.
  • Takes on the contours of the hand for an intimate fit using only moderate pressure.
  • Thinner material follows the curves of the hand and fingers with minimal handling.

Memory

  • Moderate memory will spring back slightly while warm.

Rigidity

  • Maximum rigidity.
  • Splints will hold their shape against the pull of strong dynamic components and against hypertonicity.

Bonding

  • Uncoated Solaris™ provides a slightly sticky surface when warm to keep material in place for an intimate fit.
  • A permanent bond is achieved by applying dry heat and pinching it together firmly. No solvent is needed.

Surface Finish

  • Resists fingerprinting.
  • Fingerprints and other marks disappear or can be smoothed away by rubbing the surface gently while the splint is warm.
  • Leaves sealed, smooth edges when cut warm.

Applications

  • Ideal for abnormal tone conditions or joint contractures when patients are unable to cooperate.
  • Its unique qualities make Solaris™ perfect for upper and lower extremity positioning splints and pediatric, non-weightbearing AFOs.
  • The combined drape with controlled, resistive stretch of Solaris™ allows aggressive, firm handling to form a rigid splint that conforms perfectly to the body.

Working time (1/8")

  • Allows four to six minutes to form and harden after softening in 160° F (71° C) water.

Latex Free

Free of BPA chemicals

See Specs tab for perforation and thickness

Sheets sold individually, or in a case of 2 or 4.

 

Need Strapping?
View our selection of Pre-Fabricated Straps

 

  • Hazmat: None
  • HCPCS*: None

Item Availability Definitions

  • In Stock: Standard shipping orders received before 5pm EST will ship the same day.
    Expedited shipping orders received before 11am EST will ship the same day.

  • Out of Stock: Shipment times will vary, depending on expected arrival to our inventory. The typical wait time is just a few days. Orders with both in-stock and out-of-stock items will be shipped partial, with any out-of-stock items being back-ordered and shipped complete when all back-ordered items are available. Note: All freight and handling charges are calculated on the original order. Back-orders ship and invoice separately and will not be charged additional freight and handling.

  • Pending: We are not able to provide a reasonable expected date due to supply chain & other interruptions from the manufacturer. We will continue to accept orders for these items and fulfill them on a first-come, first-serve basis as inventory becomes available

  • Direct Ship: Direct-Ship items are shipped directly from the manufacturer. We place orders with the manufacturer within a few hours of receipt of your order. Shipping times will vary, depending on the efficiency of the individual manufacturer.

  • Special Order: Requires additional information such as delivery environment and service level in order to provide an accurate shipping cost and expected date of delivery from the manufacturer.

  • On Demand: Can be expected in 10-15 days. When orders are placed for these items, we will order them from the manufacture, and they will be included in our next incoming shipment. Once we receive your items, we will ship them to you from one of our two domestic warehouses. Note: We place orders with our vendors once a week, typically on Mondays.

Additional Resources Below:

Solaris™ Instructions

» Log In For Professional Pricing

Solaris™ 1/8" (3.2mm)

Item Number Model Type Dimension You Get Availability Price Qty
NC14030-1 Smooth 18" x 24" (46 x 61cm) Sheet (1) In Stock
$67.95
NC14030 Smooth 18" x 24" (46 x 61cm) Case (4) In Stock
$247.95
NC14032 Smooth 24" x 36" (61 x 91cm) Case (2) In Stock
$246.95
NC14033 Perforated 1% 24" x 36" (61 x 91cm) Case (2) In Stock
$259.95
NC14031 Perforated 1% 18" x 24" (46 x 61cm) Case (4) In Stock
$259.95
NC14031-1 Perforated 1% 18" x 24" (46 x 61cm) Sheet (1) In Stock
$71.50
Item Number Price Qty
NC14030-1
$67.95
In Stock
Model Type:   Smooth
Dimension:   18" x 24" (46 x 61cm)
You Get:   Sheet (1)
NC14030
$247.95
In Stock
Model Type:   Smooth
Dimension:   18" x 24" (46 x 61cm)
You Get:   Case (4)
NC14032
$246.95
In Stock
Model Type:   Smooth
Dimension:   24" x 36" (61 x 91cm)
You Get:   Case (2)
NC14033
$259.95
In Stock
Model Type:   Perforated 1%
Dimension:   24" x 36" (61 x 91cm)
You Get:   Case (2)
NC14031
$259.95
In Stock
Model Type:   Perforated 1%
Dimension:   18" x 24" (46 x 61cm)
You Get:   Case (4)
NC14031-1
$71.50
In Stock
Model Type:   Perforated 1%
Dimension:   18" x 24" (46 x 61cm)
You Get:   Sheet (1)
» Log In For Professional Pricing

Solaris™ 3/32" (2.4mm)

Item Number Model Type Dimension You Get Availability Price Qty
NC14034 Smooth 18" x 24" (46 x 61cm) Case (4) In Stock
$236.95
Item Number Price Qty
NC14034
$236.95
In Stock
Model Type:   Smooth
Dimension:   18" x 24" (46 x 61cm)
You Get:   Case (4)
ADD TO CART
Back
    Double-tap to zoom